REVISED STANDARD DETAILS

  
  
  
  
RevisionComment
collapse RevisionDate : 10/22/2013 ‎(2)
Pvt602_02-27-2014.pdfPVT6 Sheet 2 of 2Pvt602_02-27-201410/22/2013
Revision to clarify slopes.  Sidewalk typical added.  Sidewalk width shown to back of curb.
pvt7 shts 1-3 combined 6-17-14.pdfPVT7 Sheets 1, 2 and 3pvt7 shts 1-3 combined 6-17-1410/22/2013
Details completely redrawn.  Sheet 3 of 3 added.  Slopes clarified.  Curb ramp types added and some changed.
collapse RevisionDate : 10/10/2013 ‎(1)
TYPE F PIPE TRENCH 02-27-2014.pdfDR-10TYPE F PIPE TRENCH 02-27-201410/10/2013
CLSM criteria for Type F Trench relaxed.
collapse RevisionDate : 11/21/2012 ‎(2)
Gr11-01 MGS 2-5-13.pdfGr11 sheet 1 of 2.pdfGr11-01 MGS 2-5-1311/21/2012
Applies to 31 height guardrail only
Gr11-02 MGS 1-10-13.pdfGr11 sheet 2 of 2.pdfGr11-02 MGS 1-10-1311/21/2012
Applies to 31 height guardrail only
collapse RevisionDate : 11/13/2012 ‎(9)
Gr1 Combined 4-8-13.pdfGr1Gr1 Combined 4-8-1311/13/2012
Applies to both 31" and 28-1/2" height guardrail.
Gr11 2-5-13.pdfGr11 sheet 1 of 2.pdfGr11 2-5-1311/13/2012
Applies to 28-1/2 height guardrail only.
Gr12-03 4-8-13.pdfGR12Gr12-03 4-8-1311/13/2012
Applies to both 31" and 28-1/2" height guardrail.
Gr1-A Combined 2-5-13.pdfGR1-AGr1-A Combined 2-5-1311/13/2012
New sheet with much of the information coming from previous sheet GR1.   Applies to both 31" and 28-1/2" height guardrail.
GR2 Combined 1-10-13.pdfGR2.pdfGR2 Combined 1-10-1311/13/2012
Guardrail posts and blocks
Gr5-01 Combined 4-23-13.pdfGr5 sheet 1of 2.pdfGr5-01 Combined 4-23-1311/13/2012
Applies to both 31"and 28-1/2" height guardrail.
Gr5-02 Combined 1-10-13.pdfGr5 sheet 2 of 2..pdfGr5-02 Combined 1-10-1311/13/2012
Applies to both 31"and 28-1/2" height guardrail.
Gr6 Combined 2-5-13.pdfGR6Gr6 Combined 2-5-1311/13/2012
Applies to both 31" and 28-1/2" height guardrail.
Gr7 Combined 2-7-13.pdfGR7Gr7 Combined 2-7-1311/13/2012
Applies to both 31" and 28-1/2" height guardrail.
collapse RevisionDate : 10/29/2012 ‎(1)
super silt fence 1-31-13.pdfF4.pdfsuper silt fence 1-31-1310/29/2012
New sheet detailing Super Silt Fence.  It is intended to be used on all projects with super silt fence.
collapse RevisionDate : 4/26/2012 ‎(1)
Standard Detail Distribution MEMO dr7-x pvt1-3 dr-9 dr-10 bc-1.pdfDistribution Memo for Revised Standard DetailsStandard Detail Distribution MEMO dr7-x pvt1-3 dr-9 dr-10 bc-14/26/2012
collapse RevisionDate : 3/6/2012 ‎(1)
Pvt601 2012_07_25  1-29-13.pdfPvt6 sheet 1 of 2.pdfPvt601 2012_07_25 1-29-133/6/2012
Height of Type 1 Curb revised to 6".  Other minor changes.  It is intended for all projects with curb.
collapse RevisionDate : 3/1/2012 ‎(2)
wood blockout 11-9-12.pdfGR15.pdfwood blockout 11-9-123/1/2012
New sheet that includes details for increasing blockout depth, paving around guardrail posts and methods of reducing guardrail deflections.  Add to projects where the need for these details are anticipated.
wood blockout1 11-9-12.pdfGR16.pdfwood blockout1 11-9-123/1/2012
New sheet that shows details for omitting guardrail posts for underground obstructions.   Add to projects where the need for these details are anticipated.
collapse RevisionDate : 12/22/2011 ‎(2)
revculert.dgnLarge Box Culvert DGNrevculert12/22/2011
revculert_12_22_11.pdfLarge Box Culvert PDFrevculert_12_22_1112/22/2011
collapse RevisionDate : 6/1/2011 ‎(1)
Gr13_6_1_11.pdfGR13Gr13_6_1_116/1/2011
Removes current barrier details and indicates that the Specifications now govern.
collapse RevisionDate : 1/17/2011 ‎(1)
TYPE A-B-C and D TRENCH 12_09_11.pdfDR9.pdfTYPE A-B-C and D TRENCH 12_09_111/17/2011
New Detail
collapse RevisionDate : 1/7/2011 ‎(1)
TYPE F PIPE TRENCH_6_1_11.pdfDR10.pdfTYPE F PIPE TRENCH_6_1_111/7/2011
New Detail
collapse RevisionDate : 12/27/2010 ‎(4)
BR-B102A_2_15_11.pdfBR-B102A PDFBR-B102A_2_15_1112/27/2010
Preformed Joint Filler thickness was revised to the bearing pad thickness plus 1/4".  Intended for use on all projects.
BR-B102B_2_10.pdfBR-B102B PDFBR-B102B_2_1012/27/2010
Preformed Joint Filler thickness was revised to the bearing pad thickness plus 1/4".  Intended for use on all projects.
BR-B102A.dgnBR-B102A DGNBR-B102A12/27/2010
Preformed Joint Filler thickness was revised to the bearing pad thickness plus 1/4".  Intended for use on all projects.
BR-B102B.dgnBR-B102B DGNBR-B102B12/27/2010
Preformed Joint Filler thickness was revised to the bearing pad thickness plus 1/4".  Intended for use on all projects.
collapse RevisionDate : 11/22/2010 ‎(2)
Pvt1_11_08_11.pdfPVT1Pvt1_11_08_1111/22/2010
Detail has been revised to reflect current practice for joint layout and sealing.  It is intended to be used on all projects with concrete pavement.
Pvt2_12_13_11.pdfPVT2Pvt2_12_13_1111/22/2010
Detail has been revised to reflect current practice for rumble strips.  It is intended to be used on all projects with rumble strips.
collapse RevisionDate : 9/13/2010 ‎(2)
M101_09_24_10.pdfM1 Sheet 1 of 2M101_09_24_109/13/2010
New Sheet.  This revision provides an alternate survey marker.  It is intended to be used on all projects with survey markers.
M102_09_24_10.pdfM1 Sheet 2 of 2M102_09_24_109/13/2010
This revision moves the survey markers to new sheet M-1, 2 of 2.  It is intended to be used on all projects with project markers.
collapse RevisionDate : 9/1/2010 ‎(2)
BR-B100_2-11.pdfBR-B100 PDFBR-B100_2-119/1/2010
In Note 3 the minimum concrete strength and strand release was corrected to 5500 psi.  Intended for use on all projects.
BR-B100_7-10.dgnBR-B100 DGNBR-B100_7-109/1/2010
In Note 3 the minimum concrete strength and strand release was corrected to 5500 psi.  Intended for use on all projects.
collapse RevisionDate : 8/19/2010 ‎(1)
F101_09_24_10.pdfF 1 Sheet 1 of 2F101_09_24_108/19/2010
This revision allows alternate line post shapes.  It is intended to be used on all projects with chain link fence.  This is a PDF file ONLY.
collapse RevisionDate : 8/1/2010 ‎(2)
BRD-III 45X16_8-10 .pdfBRD-III 45X16 PDFBRD-III 45X16_8-10 8/1/2010
Dimension on Section B-B corrected.  Intended for use on all projects.
BRD-III 45X16_8-10.dgnBRD-III 45X16 DGNBRD-III 45X16_8-108/1/2010
Dimension on Section B-B corrected.  Intended for use on all projects.
collapse RevisionDate : 7/21/2010 ‎(2)
Pvt701_09_24_10.pdfPVT7 Sheet 1 of 2Pvt701_09_24_107/21/2010
Revises detectable warning surface and clarifies pay quantities.  It is intended to be used on all projects with sidewalk ramps.
Pvt702_09_24_10.pdfPVT7 Sheet 2 of 2Pvt702_09_24_107/21/2010
Revises detectable warning surface and clarifies pay quantities.  It is intended to be used on all projects with sidewalk ramps.
collapse RevisionDate : 7/15/2010 ‎(1)
Pvt602_09_24_10.pdfPvt6 sheet 2 of 2.pdfPvt602_09_24_107/15/2010
collapse RevisionDate : 7/1/2010 ‎(12)
BR-B17B_7-10.pdfBR-B17B PDFBR-B17B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B21B_7-10.pdfBR-B21B PDFBR-B21B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B27B_7-10.pdfBR-B27B PDFBR-B27B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B33B_7-10.pdfBR-B33B PDFBR-B33B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B39B_07-10.pdfBR-B39B PDFBR-B39B_07-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B42B_7-10.pdfBR-B42B PDFBR-B42B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B17B_7-10.dgnBR-B17B DGNBR-B17B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B21B_7-10.dgnBR-B21B DGNBR-B21B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B27B_7-10.dgnBR-B27B DGNBR-B27B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B33B_7-10.dgnBR-B33B DGNBR-B33B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B39B_07-10.dgnBR-B39B DGNBR-B39B_07-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
BR-B42B_7-10.dgnBR-B42B DGNBR-B42B_7-107/1/2010
Note 3 revised and now references MP 603.10.40 for out of tolerance concrete box beams.  Intended for use on all projects.
collapse RevisionDate : 6/16/2010 ‎(1)
GR2_09_24_10.pdfGR2.pdfGR2_09_24_106/16/2010
Guardrail posts and blocks
collapse RevisionDate : 3/11/2010 ‎(2)
Gr11_09_24_10.pdfGr11 sheet 1 of 2.pdfGr11_09_24_103/11/2010
Dr7x_3_7_11.pdfDR7-XDr7x_3_7_113/11/2010
This revision adds a lightweight casting alternate. It is intended to be used on all projects with manholes.
collapse RevisionDate : 1/29/2010 ‎(4)
TEM-1  1-29-10 revised standard detail.pdfTEM-1TEM-1 1-29-10 revised standard detail1/29/2010
Entire sheet has been revised.  Intended for use with all projects
TEM-2 1-29-10 revised standard detail.pdfTEM-2 Includes Sheet 1 of 2 and Sheet 2 of 2TEM-2 1-29-10 revised standard detail1/29/2010
Entire sheet has been revised.  Intended for use with all projects
TEM-3 1-29-10 revised standard detail.pdfTEM-3TEM-3 1-29-10 revised standard detail1/29/2010
Entire sheet has been revised.  Intended for use with all projects
TEM-4 1-29-10 revised standard detail.pdfTEM-4TEM-4 1-29-10 revised standard detail1/29/2010
Entire sheet has been revised.  Intended for use with all projects
collapse RevisionDate : 1/24/2010 ‎(1)
pvt3  3-4-11.pdfPVT3pvt3 3-4-111/24/2010
Detail has been revised to reflect current practice for joint layout and sealing.  It is intended to be used on all projects with concrete pavement.

  

WV DOT Privacy Notices | Contact Us | Site Map | Disclaimer
E.E.O./AFFIRMATIVE ACTION EMPLOYER

Privacy, Security and Accessibility | WV.gov | USA.gov | © 2014 State of West Virginia