Type B-1 Delineators (Std. Detail Sheet)

Effective Date: February 22, 2010

GUARDRAIL POST "SADDLE" TYPE DELINEATORS (See note 1)

Manufacturer

 Product

Approval Number

Duraflex Corporation
Ringwood, NJ

Flexx 2020

1390155A (see notes 1,2,3 and 4)

Astro Optics Corp.
Wauwatosa, WI

FR

1390156A (see notes 1,2,3 and 4)

Pexco DavidsonTraffic Control Products
formerly
Filtronia Extrusion, Inc
(D151A)

I-FLEX-16

1390157A (see notes 1,2,3 and 4)

 

CONCRETE BARRIER OR GUARDRAIL BLOCKOUT "T-BARRIER" TYPE DELINEATIORS (See note 1)

Manufacturer

Product

Approval Number

Duraflex Corporation
Ringwood, NJ

Railrider 

1390158A (see notes 1,2,3 and 4)

Astro Optics Corp.
Wauwatosa, W

FT

1390159A (see notes 1,2,3 and 4)

Pexco DavidsonTraffic Control Products
formerly
Filtronia Extrusion, Inc
(D151A)

T-16

1390160A (see notes 1,2,3 and 4)

Plastic Safety Systems

Quik-Mark

1390161A (see notes 1,3,5 and 6)

Pexco DavidsonTraffic Control Products
formerly
Filtronia Extrusion, Inc
(D151A)

Big Dog PCBM

1390162A (see notes 1,3,5 and 6)

 

CONCRETE BARRIER SIDE MOUNT TYPE DELINEATORS

Manufacturer

Product

Approval Number

3M

LDS-W346(white) and LDS-FY346 (fl. yellow)

1390163A (see notes 1 and 7)


Notes
1.  All B-1 delineators shall be installed in accordance with the
recommendations of the manufacturer.  The sheeting on all B-1
delineators shall be pre-installed on the face(s) of the delineators by the
manufacturer.

2.  4"x4" reflective face(s).

3.  To be used only in the following color combinations ( as specified
 in the contract plans):

  • white sheeting on the front only or front and back.    
  • white sheeting on the front and red sheeting on the back.    
  • fluorescent-yellow (if Type ASTM-IX) or yellow (if Type ASTM-III)
    sheeting on the front only or front and back.    
  • fluorescent-yellow (if Type ASTM-IX) or yellow (if Type ASTM-III)
    sheeting on the front and resheeting on the back.

 
4.  Sheeting used shall be Type ASTM-IX

5.  12" x 8" reflective face(s).

6.  Sheeting shall be Type ASTM-III, reboundable or non-reboundable,
per the manufacturer's recommendation.

7.  The delineator shall be installed such that the top edge of the
delineator is approximately 6" below the top of the barrier.  The color
of the delineator shall be white or fluorescent-yellow, as required, in
order to match the color of the edge line that the delineator is intended
to supplement.

  

WV DOT Privacy Notices | Contact Us | Site Map | Disclaimer
E.E.O./AFFIRMATIVE ACTION EMPLOYER

Privacy, Security and Accessibility | WV.gov | USA.gov | © 2014 State of West Virginia